Home About Us Analytical Techniques Problem Solving Analysis Consultancy Industrial Sectors Contact Us
Problem Solving
Galvanic, Pitting and Crevice Corrosion
Typical Technical Expertise
Interface Adhesion, Adhesives and Coatings
Composite Release Films and Mould Release Agents
Corrosion, Degradation and Oxidation
Galvanic Pitting and Crevice Corrosion
Plastics Rubbers and Coating Degradation
Pharmaceutical Particle Counting
Particle Contamination Identification
Particle Identification Methodology
Materials, Product and Process Reverse Engineering
Chemical Product Deformulation and Reformulation
Electronic Devices and PCB Failure Investigations
Chemical Cleaning, Degreasing and Rinsing
Surface Preparation, Chemical Etching, Electrochemical and Pickling Processes
Paint, Adhesive, Sealant and Gasket Filler Fingerprinting
Themionic Emission - Cathode and Source Development
Electronic Cigarette Chemical Evaluation

Contact Us
Print this page

Corrosion is a common problem in industrial environments due to the presence of a variety of metallic materials, aggressive species (such as acids, chlorides) and often high humidity and temperatures. Corrosion takes many forms with each presenting unique challenges. Common corrosion problems briefly include:

SEM of pitting corrosion of Copper pipe

  • Galvanic corrosion occurs between dissimilar metals in an electrolyte. Depending on what materials are coupled, the effect on the corrosion rate of the less noble metal can be very dramatic. This type of corrosion is common due to variety of alloys used in industrial applications.
  • Pitting corrosion occurs in metals / alloys with a passive layer, such as stainless steel, aluminium alloys, nickel alloys and copper in environments containing aggressive species such as chloride ions. It is a particularly detrimental type of corrosion due to pits easily escaping naked eye inspections. Pitting rates can be rapid and as a result material can fail without prior notice with catastrophic results.
  • Crevice corrosion is also common in industrial environments as it tends to occur in tight spaces such as joints between parts, under gaskets, inside cracks and under deposits. The nature of this corrosion is similar to pitting, and because of its hidden nature, it can be tricky to locate.

Metallic plating blistering as corrosion product builds upInappropriate material selection, poor installation and / or maintenance, materials not meeting stated specifications (coating thickness, compositions etc.) are often the reasons for corrosion and ultimately failures. Corrosion problems can be studied in many ways to understand the root cause and employ appropriate measures.

LPD Lab Services have a vast experience in corrosion-related problem solving and failure investigations. The laboratory employ optical microscopy and SEM/EDX to visually and chemically characterise the corrosion. This provides information about the nature of the corrosion attack and its extent:

  • Is it cracking?
  • Is it pitting?
  • Is there a pinhole?
  • Where does the attack originate?

Cross section of Stress Corrosion Cracking of stainless steel pipeLPD can do wet chemical testing using a Potentiostat to assess materials compatibility and corrosion mechanisms, such as immersion corrosion tests. Analysis of the elements using techniques like Ion Chromatography present help find the aggressive species which could have caused the attack, such as the presence of sulphates, chlorides, nitrates and their effect on the given material.


Potentiostat Electrochemical Testing

The Potentiostat measures the electrochemical characteristics of a metal and aqueous system, measures the corrosion rate of material and its passivity and pitting behaviour.

Phenolic Foam Enhanced Water Pipe Corrosion

The Potentiostat measures the electrochemical characteristics of a metal and aqueous system, measures the corrosion rate of material and its passivity and pitting behaviour.

Corrosion, Degradation and Oxidation

 Materials are attacked by the environment shortening their functional life without the correct protection or by inappropriate design. This includes aqueous corrosion, high temperature oxidation in addition to degradation.

Copyright 2019 LPD Lab Services Ltd. All rights reserved.